Zanduco 58" Ice Cream Display Freezer

At 17.7 cubic feet, the Zanduco 58" Ice Cream Display Freezer sits between the 50" (13 cu. ft.) and 79" (24.72 cu. ft.) display freezer options. It is the right match for a mid-volume convenience store, regional grocery store frozen novelty section, or a diner that runs a moderate frozen selection and restocks every one to two days.

The gray plastic trim runs along the frame edges of the white-painted steel exterior and protects against chip and impact damage at the most vulnerable edges of the cabinet. Clean it with a mild all-purpose cleaner; avoid solvents or bleach that discolor the plastic. Cracked trim is cosmetic, but cracked trim at the glass door channel can interfere with the sliding mechanism.

The curved profile creates a convex lens effect that makes the interior product appear slightly larger and more prominent from a distance. In a store aisle, that visual magnification catches the customer's eye from 15 to 20 feet away in a way that a flat-lid chest freezer at the same distance does not. It is a passive merchandising advantage built into the glass shape.

Confirm that all four two-inch casters roll smoothly and that both locking casters engage firmly before loading product. A locking caster that does not hold under load will allow the 58" cabinet to roll when customers lean on the glass frame, which is both a safety issue and a product damage risk if the unit contacts a display shelf or adjacent freezer.

The curved glass lid panels are not designed to support weight from above. Do not stack product cases, signage frames, or POS materials on the closed glass top. The glass is tempered for impact resistance from accidental contact, not for sustained point-load weight, and a cracked glass panel from loading is not a warranty-covered failure.

Frost accumulation along the inner wall near the door seal indicates the door gasket is not seating fully. Remove the sliding glass panels and inspect the rubber gasket along the top edge of the cabinet opening. Even a small gap in the gasket allows warm air infiltration that immediately frosts the inner wall directly behind the contact point.

Backed by a 1-year Parts and Labor warranty. This is a 1-year-only policy with no extended compressor coverage. Given that the unit is noted as a display-only product (not for active scooping service), keep it in the rated ambient environment and the 1-year coverage should carry it through its most vulnerable early operational period.