Omcan Stainless Steel 16 oz. Pint Cup

Made from 304 18/8 stainless steel, the Omcan Stainless Steel Pint Cup 16 oz resists rust, citrus acids, and salt corrosion that ruin cheaper cups behind the bar. The 0.5 mm wall is FDA-compliant and food-safe.

Paired with a Boston glass or weighted tin, the Omcan Stainless Steel Pint Cup 16 oz seals tight, chills fast, and stands up to thousands of shakes a week. It pairs naturally with the rest of our bar supplies and bartending tools.

Cold service is the primary use case for the Omcan Stainless Steel Pint Cup 16 oz, since the thin-walled steel transfers heat quickly and gets uncomfortable to hold with hot liquids. It works well for iced coffee, beer, water, and mixed drinks.

Stack them inverted on a clean, dry rack so air can circulate and water spots do not form on the rim. Keep cups away from raw protein workstations to avoid cross-contamination during dinner service.

Wash in warm soapy water or run through a commercial dishwasher, then dry with a soft cloth right away. Skip steel wool and chlorinated bleach since both pit 304 stainless and leave permanent marks behind the bar.

Avoid stovetop heating, microwave use, leaving acidic mixers sitting overnight, and abrasive scouring pads, since each of these will pit, warp, or dull the polished stainless finish. Specifics: • Do not use as a heating vessel on a stovetop or in a microwave. • Avoid leaving acidic mixers or citrus juice sitting overnight as prolonged exposure can dull the finish. • Skip abrasive scouring pads that scratch the polished surface.

Filled to the brim, this 16 oz cup holds a true US pint, but you will lose roughly an ounce to head on a properly poured draught. Most bars pour to 14 oz to leave room for foam and presentation.