The Imperial ITG-24 is a 24-inch thermostatically controlled griddle designed for consistent, high-performance cooking in demanding kitchen environments.  The ITG-24 features individual thermostat controls, allowing you to dial in exact temperatures across different zones of the griddle surface. This gives you better control over cooking delicate items like eggs or pancakes while searing meats or vegetables on another section—all at the same time.

Simple manual controls and a straightforward layout make this unit easy for any staff member to use, regardless of experience level. Minimal training required means more efficiency on the line.

Burners

• Thermostat maintains selected temperature during peak hours.
• Each griddle burner is rated at 30,000 BTU (9KW).
• Aeration baffles between burners spread the heat evenly across the entire griddle surface.
• Burners are located every 12” (305 mm).
• Each burner has an adjustable gas valve and continuous pilot for instant Ignition

Griddle Plate

• Highly polished 1” (25 mm) thick steel plate holds temperature and has a quick recovery.
• Full 24” (610 mm) plate depth for more cooking surface.
• Surface is ideal for a large range of menu items.
• Optional chrome and grooved griddle top are available as an option.

Grease Maintenance

• Stainless steel grease gutter is 4” (102 mm) wide.
• Large 1 gal (3.8 L) capacity grease can has a weep hole to indicate when full.
• Grease can removes easily.

Exterior

• Stainless steel front, sides, splash guard, and ledge. 
• Stainless steel ledge is one piece rolled for cleaning convenience.
• Range match profile when placed on a refrigerated base or equipment stand.
• Control knobs are cast aluminum with a Valox™ heat protection grip.
• 4” (102 mm) stainless steel legs are included.

Options and Accessories 

• Stainless steel equipment stands
• 6” (152 mm) casters for equipment stands
• Open burners available, set of 4 burners, add 24” (610 mm) to width and “OB-4” to model number
• Open burners available, set of 2 burners, add 12” (305 mm) to width and “OB-2” to model number
• 7” (178 mm) deep, stainless steel front landing ledge
• 9” (229 mm) deep, stainless steel front landing ledge
• Chrome griddle top, (add “-CG” to model number)
• Extra grease can

Clearance Requirement

• For use only on non-combustible surfaces.
• Provide 0” clearance from non-combustible surfaces and 6” (152 mm) from combustible surfaces.