Zanduco
Free Delivery
powered by Symantec

Taylor Soft Serve Multi-Flavor Freezer Twin Twist 791


 
$22,723.00 CAD

Item Number: 12000-448

  

Offer all the popular soft serve variations from low or nonfat ice creams to custards, yogurt and sorbet. Serve two separate soft serve flavors, or an equal combination of both in a twist.

FEATURES

Freezing Cylinder
Two, 3.4 quart (3.2 liter)

Mix Hopper
Two, 14 quart (13.2 liter). Separate hopper refrigeration (SHR) maintains mix below 41ºF (5ºC) during Auto and Standby modes.

Indicator Lights
Mix Low and Mix Out light alerts operator to add mix.

Electronic Controls
Softech™ is our exclusive microprocessor based master control that regulates refrigeration by measuring product viscosity to maintain consistent quality.

Standby
During long no-use periods, the standby feature maintains safe product temperatures in the mix hopper and freezing cylinder.

Optional Drain Assembly
A factory installed optional, drain assembly, with funnel, is available to simplify the cleaning process. A drain line, connected under the drip tray connects to a 1” FPT coupling in the base pan to drain rinse water directly into the floor drain.

Two Locking Casters
Front casters have a locking feature for operators to lock to maintain equipment in place. The locking casters can be released to move the equipment for cleaning.

Freezer Door
A specially designed thermo-plastic door allows quick ejection of product with a simple movement of the draw handle. Self closing draw handles are standard.

Door Interlock System
Protects the operator from injury as the beater will not operate without the dispensing door in place.

Pull Handles
Convenient recessed pull handles for ease in moving the equipment for cleaning.

Offer all the popular soft serve variations from low or nonfat ice creams to custards, yogurt and sorbet. Serve two separate soft serve flavors, or an equal combination of both in a twist.

FEATURES

Freezing Cylinder
Two, 3.4 quart (3.2 liter)

Mix Hopper
Two, 14 quart (13.2 liter). Separate hopper refrigeration (SHR) maintains mix below 41ºF (5ºC) during Auto and Standby modes.

Indicator Lights
Mix Low and Mix Out light alerts operator to add mix.

Electronic Controls
Softech™ is our exclusive microprocessor based master control that regulates refrigeration by measuring product viscosity to maintain consistent quality.

Standby
During long no-use periods, the standby feature maintains safe product temperatures in the mix hopper and freezing cylinder.

Optional Drain Assembly
A factory installed optional, drain assembly, with funnel, is available to simplify the cleaning process. A drain line, connected under the drip tray connects to a 1” FPT coupling in the base pan to drain rinse water directly into the floor drain.

Two Locking Casters
Front casters have a locking feature for operators to lock to maintain equipment in place. The locking casters can be released to move the equipment for cleaning.

Freezer Door
A specially designed thermo-plastic door allows quick ejection of product with a simple movement of the draw handle. Self closing draw handles are standard.

Door Interlock System
Protects the operator from injury as the beater will not operate without the dispensing door in place.

Pull Handles
Convenient recessed pull handles for ease in moving the equipment for cleaning.

Electrical

One dedicated electrical connection is required. See the Electrical chart for  the proper electrical requirements. Unit supplied with cord and plug. Consult the international Taylor distributor for cord & receptacle specifications for  50 Hz. equipment. 

Beater Motor

Two, 1.5 HP.

Refrigeration System

One, 9,500 BTU/hr. R404A.

Separate Hopper Refrigeration (SHR), One, 400 BTU/hr. R134a.

(BTUs may vary depending on compressor used.)

Air Cooled

Minimum 3” (76 mm) around all sides. Install the deflector provided to prevent recirculation of warm air. Minimum air clearances must be met to assure adequate air flow for optimum performance.

Water Cooled

Water inlet and drain connections under side of base 1/2” FPT.

* Warranty covered for all of Canada. 

** Installation in Canada on New Machines will be start up and training by one of Taylors factory trained technicians.

    791

Product Information

Loading...
What`s your question?

Start typing your question. Review your question to make any final changes. It may be sent to fellow customers so ask as if you were asking a friend.

0 Questions 0 Answers
sort by:
Most Common Questions
No questions
Please do not include HTML, links, references to other stores, pricing or contact info

You must be logged in.

To answer the questions you must purchase this item